ini

config/application.rb

@@ -0,0 +1,39 @@
+require_relative "boot"
+
+require "rails"
+# Pick the frameworks you want:
+require "active_model/railtie"
+require "active_job/railtie"
+require "active_record/railtie"
+require "active_storage/engine"
+require "action_controller/railtie"
+# require "action_mailer/railtie"
+# require "action_mailbox/engine"
+require "action_text/engine"
+require "action_view/railtie"
+# require "action_cable/engine"
+require "rails/test_unit/railtie"
+
+# Require the gems listed in Gemfile, including any gems
+# you've limited to :test, :development, or :production.
+Bundler.require(*Rails.groups)
+
+module PlaysHub
+  class Application < Rails::Application
+    # Initialize configuration defaults for originally generated Rails version.
+    config.load_defaults 8.0
+
+    # Please, add to the `ignore` list any other `lib` subdirectories that do
+    # not contain `.rb` files, or that should not be reloaded or eager loaded.
+    # Common ones are `templates`, `generators`, or `middleware`, for example.
+    config.autoload_lib(ignore: %w[assets tasks])
+
+    # Configuration for the application, engines, and railties goes here.
+    #
+    # These settings can be overridden in specific environments using the files
+    # in config/environments, which are processed later.
+    #
+    # config.time_zone = "Central Time (US & Canada)"
+    # config.eager_load_paths << Rails.root.join("extras")
+  end
+end

config/boot.rb

@@ -0,0 +1,4 @@
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../Gemfile", __dir__)
+
+require "bundler/setup" # Set up gems listed in the Gemfile.
+require "bootsnap/setup" # Speed up boot time by caching expensive operations.

config/credentials.yml.enc

@@ -0,0 +1 @@
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--O4pxK2ADGT1s/ODe--DOcQQ2trxQFQ0aY1MWdKDw==

config/database.yml

@@ -0,0 +1,85 @@
+# PostgreSQL. Versions 9.3 and up are supported.
+#
+# Install the pg driver:
+#   gem install pg
+# On macOS with Homebrew:
+#   gem install pg -- --with-pg-config=/usr/local/bin/pg_config
+# On Windows:
+#   gem install pg
+#       Choose the win32 build.
+#       Install PostgreSQL and put its /bin directory on your path.
+#
+# Configure Using Gemfile
+# gem "pg"
+#
+default: &default
+  adapter: postgresql
+  encoding: unicode
+  # For details on connection pooling, see Rails configuration guide
+  # https://guides.rubyonrails.org/configuring.html#database-pooling
+  pool: <%= ENV.fetch("RAILS_MAX_THREADS") { 5 } %>
+
+
+development:
+  <<: *default
+  database: plays_hub_development
+
+  # The specified database role being used to connect to PostgreSQL.
+  # To create additional roles in PostgreSQL see `$ createuser --help`.
+  # When left blank, PostgreSQL will use the default role. This is
+  # the same name as the operating system user running Rails.
+  #username: plays_hub
+
+  # The password associated with the PostgreSQL role (username).
+  #password:
+
+  # Connect on a TCP socket. Omitted by default since the client uses a
+  # domain socket that doesn't need configuration. Windows does not have
+  # domain sockets, so uncomment these lines.
+  #host: localhost
+
+  # The TCP port the server listens on. Defaults to 5432.
+  # If your server runs on a different port number, change accordingly.
+  #port: 5432
+
+  # Schema search path. The server defaults to $user,public
+  #schema_search_path: myapp,sharedapp,public
+
+  # Minimum log levels, in increasing order:
+  #   debug5, debug4, debug3, debug2, debug1,
+  #   log, notice, warning, error, fatal, and panic
+  # Defaults to warning.
+  #min_messages: notice
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: plays_hub_test
+
+# As with config/credentials.yml, you never want to store sensitive information,
+# like your database password, in your source code. If your source code is
+# ever seen by anyone, they now have access to your database.
+#
+# Instead, provide the password or a full connection URL as an environment
+# variable when you boot the app. For example:
+#
+#   DATABASE_URL="postgres://myuser:mypass@localhost/somedatabase"
+#
+# If the connection URL is provided in the special DATABASE_URL environment
+# variable, Rails will automatically merge its configuration values on top of
+# the values provided in this file. Alternatively, you can specify a connection
+# URL environment variable explicitly:
+#
+#   production:
+#     url: <%= ENV["MY_APP_DATABASE_URL"] %>
+#
+# Read https://guides.rubyonrails.org/configuring.html#configuring-a-database
+# for a full overview on how database connection configuration can be specified.
+#
+production:
+  <<: *default
+  database: plays_hub_production
+  username: plays_hub
+  password: <%= ENV["PLAYS_HUB_DATABASE_PASSWORD"] %>

config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require_relative "application"
+
+# Initialize the Rails application.
+Rails.application.initialize!

config/environments/development.rb

@@ -0,0 +1,60 @@
+require "active_support/core_ext/integer/time"
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Make code changes take effect immediately without server restart.
+  config.enable_reloading = true
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable server timing.
+  config.server_timing = true
+
+  # Enable/disable Action Controller caching. By default Action Controller caching is disabled.
+  # Run rails dev:cache to toggle Action Controller caching.
+  if Rails.root.join("tmp/caching-dev.txt").exist?
+    config.action_controller.perform_caching = true
+    config.action_controller.enable_fragment_cache_logging = true
+    config.public_file_server.headers = { "cache-control" => "public, max-age=#{2.days.to_i}" }
+  else
+    config.action_controller.perform_caching = false
+  end
+
+  # Change to :null_store to avoid any caching.
+  config.cache_store = :memory_store
+
+  # Store uploaded files on the local file system (see config/storage.yml for options).
+  config.active_storage.service = :local
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Highlight code that triggered database queries in logs.
+  config.active_record.verbose_query_logs = true
+
+  # Append comments with runtime information tags to SQL queries in logs.
+  config.active_record.query_log_tags_enabled = true
+
+  # Highlight code that enqueued background job in logs.
+  config.active_job.verbose_enqueue_logs = true
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  config.action_view.annotate_rendered_view_with_filenames = true
+
+  # Raise error when a before_action's only/except options reference missing actions.
+  config.action_controller.raise_on_missing_callback_actions = true
+
+  # Apply autocorrection by RuboCop to files generated by `bin/rails generate`.
+  # config.generators.apply_rubocop_autocorrect_after_generate!
+end

config/environments/production.rb

@@ -0,0 +1,73 @@
+require "active_support/core_ext/integer/time"
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.enable_reloading = false
+
+  # Eager load code on boot for better performance and memory savings (ignored by Rake tasks).
+  config.eager_load = true
+
+  # Full error reports are disabled.
+  config.consider_all_requests_local = false
+
+  # Turn on fragment caching in view templates.
+  config.action_controller.perform_caching = true
+
+  # Cache assets for far-future expiry since they are all digest stamped.
+  config.public_file_server.headers = { "cache-control" => "public, max-age=#{1.year.to_i}" }
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.asset_host = "http://assets.example.com"
+
+  # Store uploaded files on the local file system (see config/storage.yml for options).
+  config.active_storage.service = :local
+
+  # Assume all access to the app is happening through a SSL-terminating reverse proxy.
+  config.assume_ssl = true
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  config.force_ssl = true
+
+  # Skip http-to-https redirect for the default health check endpoint.
+  # config.ssl_options = { redirect: { exclude: ->(request) { request.path == "/up" } } }
+
+  # Log to STDOUT with the current request id as a default log tag.
+  config.log_tags = [ :request_id ]
+  config.logger   = ActiveSupport::TaggedLogging.logger(STDOUT)
+
+  # Change to "debug" to log everything (including potentially personally-identifiable information!)
+  config.log_level = ENV.fetch("RAILS_LOG_LEVEL", "info")
+
+  # Prevent health checks from clogging up the logs.
+  config.silence_healthcheck_path = "/up"
+
+  # Don't log any deprecations.
+  config.active_support.report_deprecations = false
+
+  # Replace the default in-process memory cache store with a durable alternative.
+  # config.cache_store = :mem_cache_store
+
+  # Replace the default in-process and non-durable queuing backend for Active Job.
+  # config.active_job.queue_adapter = :resque
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+
+  # Only use :id for inspections in production.
+  config.active_record.attributes_for_inspect = [ :id ]
+
+  # Enable DNS rebinding protection and other `Host` header attacks.
+  # config.hosts = [
+  #   "example.com",     # Allow requests from example.com
+  #   /.*\.example\.com/ # Allow requests from subdomains like `www.example.com`
+  # ]
+  #
+  # Skip DNS rebinding protection for the default health check endpoint.
+  # config.host_authorization = { exclude: ->(request) { request.path == "/up" } }
+end

config/environments/test.rb

@@ -0,0 +1,45 @@
+# The test environment is used exclusively to run your application's
+# test suite. You never need to work with it otherwise. Remember that
+# your test database is "scratch space" for the test suite and is wiped
+# and recreated between test runs. Don't rely on the data there!
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # While tests run files are not watched, reloading is not necessary.
+  config.enable_reloading = false
+
+  # Eager loading loads your entire application. When running a single test locally,
+  # this is usually not necessary, and can slow down your test suite. However, it's
+  # recommended that you enable it in continuous integration systems to ensure eager
+  # loading is working properly before deploying your code.
+  config.eager_load = ENV["CI"].present?
+
+  # Configure public file server for tests with cache-control for performance.
+  config.public_file_server.headers = { "cache-control" => "public, max-age=3600" }
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+  config.cache_store = :null_store
+
+  # Render exception templates for rescuable exceptions and raise for other exceptions.
+  config.action_dispatch.show_exceptions = :rescuable
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Store uploaded files on the local file system in a temporary directory.
+  config.active_storage.service = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  # config.action_view.annotate_rendered_view_with_filenames = true
+
+  # Raise error when a before_action's only/except options reference missing actions.
+  config.action_controller.raise_on_missing_callback_actions = true
+end

config/importmap.rb

@@ -0,0 +1,3 @@
+# Pin npm packages by running ./bin/importmap
+
+pin "application"

config/initializers/assets.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = "1.0"
+
+# Add additional assets to the asset load path.
+# Rails.application.config.assets.paths << Emoji.images_path

config/initializers/content_security_policy.rb

@@ -0,0 +1,25 @@
+# Be sure to restart your server when you modify this file.
+
+# Define an application-wide content security policy.
+# See the Securing Rails Applications Guide for more information:
+# https://guides.rubyonrails.org/security.html#content-security-policy-header
+
+# Rails.application.configure do
+#   config.content_security_policy do |policy|
+#     policy.default_src :self, :https
+#     policy.font_src    :self, :https, :data
+#     policy.img_src     :self, :https, :data
+#     policy.object_src  :none
+#     policy.script_src  :self, :https
+#     policy.style_src   :self, :https
+#     # Specify URI for violation reports
+#     # policy.report_uri "/csp-violation-report-endpoint"
+#   end
+#
+#   # Generate session nonces for permitted importmap, inline scripts, and inline styles.
+#   config.content_security_policy_nonce_generator = ->(request) { request.session.id.to_s }
+#   config.content_security_policy_nonce_directives = %w(script-src style-src)
+#
+#   # Report violations without enforcing the policy.
+#   # config.content_security_policy_report_only = true
+# end

config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure parameters to be partially matched (e.g. passw matches password) and filtered from the log file.
+# Use this to limit dissemination of sensitive information.
+# See the ActiveSupport::ParameterFilter documentation for supported notations and behaviors.
+Rails.application.config.filter_parameters += [
+  :passw, :email, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn, :cvv, :cvc
+]

config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, "\\1en"
+#   inflect.singular /^(ox)en/i, "\\1"
+#   inflect.irregular "person", "people"
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym "RESTful"
+# end

config/locales/en.yml

@@ -0,0 +1,31 @@
+# Files in the config/locales directory are used for internationalization and
+# are automatically loaded by Rails. If you want to use locales other than
+# English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t "hello"
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t("hello") %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more about the API, please read the Rails Internationalization guide
+# at https://guides.rubyonrails.org/i18n.html.
+#
+# Be aware that YAML interprets the following case-insensitive strings as
+# booleans: `true`, `false`, `on`, `off`, `yes`, `no`. Therefore, these strings
+# must be quoted to be interpreted as strings. For example:
+#
+#     en:
+#       "yes": yup
+#       enabled: "ON"
+
+en:
+  hello: "Hello world"

config/puma.rb

@@ -0,0 +1,38 @@
+# This configuration file will be evaluated by Puma. The top-level methods that
+# are invoked here are part of Puma's configuration DSL. For more information
+# about methods provided by the DSL, see https://puma.io/puma/Puma/DSL.html.
+#
+# Puma starts a configurable number of processes (workers) and each process
+# serves each request in a thread from an internal thread pool.
+#
+# You can control the number of workers using ENV["WEB_CONCURRENCY"]. You
+# should only set this value when you want to run 2 or more workers. The
+# default is already 1.
+#
+# The ideal number of threads per worker depends both on how much time the
+# application spends waiting for IO operations and on how much you wish to
+# prioritize throughput over latency.
+#
+# As a rule of thumb, increasing the number of threads will increase how much
+# traffic a given process can handle (throughput), but due to CRuby's
+# Global VM Lock (GVL) it has diminishing returns and will degrade the
+# response time (latency) of the application.
+#
+# The default is set to 3 threads as it's deemed a decent compromise between
+# throughput and latency for the average Rails application.
+#
+# Any libraries that use a connection pool or another resource pool should
+# be configured to provide at least as many connections as the number of
+# threads. This includes Active Record's `pool` parameter in `database.yml`.
+threads_count = ENV.fetch("RAILS_MAX_THREADS", 3)
+threads threads_count, threads_count
+
+# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
+port ENV.fetch("PORT", 3000)
+
+# Allow puma to be restarted by `bin/rails restart` command.
+plugin :tmp_restart
+
+# Specify the PID file. Defaults to tmp/pids/server.pid in development.
+# In other environments, only set the PID file if requested.
+pidfile ENV["PIDFILE"] if ENV["PIDFILE"]

config/routes.rb

@@ -0,0 +1,14 @@
+Rails.application.routes.draw do
+  # Define your application routes per the DSL in https://guides.rubyonrails.org/routing.html
+
+  # Reveal health status on /up that returns 200 if the app boots with no exceptions, otherwise 500.
+  # Can be used by load balancers and uptime monitors to verify that the app is live.
+  get "up" => "rails/health#show", as: :rails_health_check
+
+  # Render dynamic PWA files from app/views/pwa/* (remember to link manifest in application.html.erb)
+  # get "manifest" => "rails/pwa#manifest", as: :pwa_manifest
+  # get "service-worker" => "rails/pwa#service_worker", as: :pwa_service_worker
+
+  # Defines the root path route ("/")
+  # root "posts#index"
+end

config/storage.yml

@@ -0,0 +1,34 @@
+test:
+  service: Disk
+  root: <%= Rails.root.join("tmp/storage") %>
+
+local:
+  service: Disk
+  root: <%= Rails.root.join("storage") %>
+
+# Use bin/rails credentials:edit to set the AWS secrets (as aws:access_key_id|secret_access_key)
+# amazon:
+#   service: S3
+#   access_key_id: <%= Rails.application.credentials.dig(:aws, :access_key_id) %>
+#   secret_access_key: <%= Rails.application.credentials.dig(:aws, :secret_access_key) %>
+#   region: us-east-1
+#   bucket: your_own_bucket-<%= Rails.env %>
+
+# Remember not to checkin your GCS keyfile to a repository
+# google:
+#   service: GCS
+#   project: your_project
+#   credentials: <%= Rails.root.join("path/to/gcs.keyfile") %>
+#   bucket: your_own_bucket-<%= Rails.env %>
+
+# Use bin/rails credentials:edit to set the Azure Storage secret (as azure_storage:storage_access_key)
+# microsoft:
+#   service: AzureStorage
+#   storage_account_name: your_account_name
+#   storage_access_key: <%= Rails.application.credentials.dig(:azure_storage, :storage_access_key) %>
+#   container: your_container_name-<%= Rails.env %>
+
+# mirror:
+#   service: Mirror
+#   primary: local
+#   mirrors: [ amazon, google, microsoft ]